Google Ads Editor guide · Search campaigns

Google Ads Editor: how to upload a Search campaign. From a spreadsheet to your account, paused.

Google Ads Editor is Google’s desktop app for building campaigns offline and posting them to your account in one go. It is the quickest way to get a finished campaign out of a spreadsheet without retyping it into the Google Ads website.

This guide takes one complete Search campaign and puts it into Editor in seven steps. Each step is a pair: what to read in the sheet, then what to do in Editor.

By Sean Cooney, founder of Omologist.
Running Google Ads since 2001.

What you will upload the example

Search campaign

1

Ad groups

6

Keywords, exact and phrase

89

Responsive search ads

6

Campaign negative keywords

74

Ad group negative keywords

14

The example is our sample build for Alderfen, a fictional furniture retailer running a Black Friday sale. Any Search campaign laid out the same way works.

Before you open Editor.

Three things to have in place. The first one matters more than everything else in this guide.

01

Conversion tracking is recording

A campaign that cannot see its own sales or leads cannot be judged or optimised. Check that your main conversion action is recording before you build anything. How to set it up.

02

Editor is installed and your account is downloaded

Download Google Ads Editor from Google, open it, add your account from the Accounts window, and download it. Editor works on that downloaded copy.

03

The spreadsheet is open beside it

You will copy from the sheet and paste into Editor all the way through, so put the two windows side by side. Read the summary tab first so you know what you are building.

Nothing you do in Editor touches your live account until you press Post in step 7. Until then you are working on a copy, and every paste can be undone.

Where each part of the sheet goes.

Editor is organised the same way as a campaign: the account tree on the left, a list of item types below it, and an edit panel on the right. Each tab of the sheet has one home.

Tab in the sheetWhere it goes in EditorHow
Campaign OverviewCampaignsTyped once, in step 1
Strategy & Budget AllocationAd groupsPasted, in step 2
Ad Group tabs: keywordsKeywordsPasted for each ad group, in step 3
Ad Group tabs: headlines and descriptionsResponsive search adsPasted field by field, in step 4
Negative KeywordsKeywords, NegativePasted in two runs, in step 5
Ad Group tabs: sitelinks, callouts, snippetsAssetsAdded in step 6
Pre-Launch ChecklistCampaign settingsChecked before you post, in step 7

Step 1

Create the campaign, paused.

The campaign holds the settings that are easiest to get wrong, so it is the one thing you type by hand. Everything below it is pasted.

In the sheet tab: Campaign Overview
SettingValue
Campaign TypeFlighted (Search)
Start Date2026-11-24
End Date2026-12-01
Monthly BudgetA$2,000
Geo TargetingAustralia – National
Bidding StrategyMaximize Conversions
In Google Ads Editor
  1. Open the Data menu, choose Add new and add a new campaign. Choose Search as the campaign type.
  2. Give it a name you will recognise in a report, such as the brand, the campaign type and the promotion.
  3. Set Status to Paused. Do this now, not at the end.
  4. Enter the daily budget. The sheet gives a monthly figure, so divide it by 30.4: A$2,000 ÷ 30.4 = A$65.79 a day.
  5. Set the bid strategy from the sheet, add the start and end dates, and set the language.
  6. In the type list, open Keywords and targeting › Locations and add the country or area from the sheet.

Check three defaults. Turn the Display Network off for a Search campaign. Set the location targeting method to presence, meaning people in or regularly in your area, and not “presence or interest”. Leave the campaign-level broad match setting off, or it will override the match types you are about to paste.

If Editor asks. New campaigns need a declaration about European Union political advertising. Answer it for your campaign, or Editor will hold the campaign back with an error when you check your changes.

Step 2

Add the ad groups.

One ad group for each theme in the sheet. Do not merge them to save time. Tight themes are what let each ad match its keywords.

In the sheet tab: Strategy & Budget Allocation
#Ad GroupBudget %
1Alderfen Brand8%
2Standing & Sit-Stand Desks32%
3Ergonomic Office Chairs30%
4Monitor Arms & Desk Lighting15%
5Desk Accessories & Home Office Setup7%
6Black Friday — Ergonomic Furniture Sale8%
The budget percentages are guidance for later. A Search campaign has one budget, and ad groups do not have their own.
In Google Ads Editor
  1. Select the new campaign in the account tree on the left.
  2. In the type list, choose Ad groups, then click Make multiple changes.
  3. Under Destination, choose Use selected destinations.
  4. Copy the Ad Group column from the sheet and paste it into the grid. Set the column heading to Ad group if Editor has not picked it up.
  5. Click Process, then Finish and review changes, then Keep.

Step 3

Paste the keywords, one ad group at a time.

Each ad group tab has its own keyword table. Only take the rows marked Yes in the Launch column.

In the sheet tab: Ad Group 2
KeywordMatch TypeVolumeCPC
[standing desk]EXACT271002.3
"standing desk"PHRASE271002.3
[sit stand desk]EXACT148002.51
"sit stand desk"PHRASE148002.51
[electric standing desk]EXACT36001.68
"electric standing desk"PHRASE36001.68
Six of the 20 keywords in this ad group. Square brackets mean exact match and quotation marks mean phrase match.
In Google Ads Editor
  1. Select the matching ad group in the account tree.
  2. In the type list, choose Keywords and targeting › Keywords, then click Make multiple changes.
  3. Choose Use selected destinations.
  4. Copy the Keyword and Match Type columns from the sheet, both together, and paste them into the grid. Check the two column headings read Keyword and Match type.
  5. Click Process, then Finish and review changes, then Keep.
  6. Repeat for each ad group tab.

Check before you move on. Sort the keyword list by match type. Every keyword should read Exact or Phrase, and none should read Broad. A keyword pasted without its match type becomes broad match, which is the most expensive mistake in this whole process. Also check that no keyword still has brackets or quotation marks inside its text.

Step 4

Add the responsive search ad.

One ad for each ad group: up to 15 headlines and 4 descriptions that Google mixes and tests. The sheet has already counted every character against Google’s limits.

In the sheet tab: Ad Group 2
#HeadlineChars
1Standing Desks Built to Last28
2Electric Standing Desks23
3Sit-Stand Desks, Home Office28
4Height-Adjustable Desks23
5Dual-Motor, Whisper-Quiet25
Five of the 15 headlines. Descriptions sit below them, for example: “Dual-motor sit-stand desks with memory presets. 48", 60", 72" and L-shape tops.” (79 characters).
In Google Ads Editor
  1. Select the ad group in the account tree.
  2. In the type list, choose Ads › Responsive search ads and add a new responsive search ad.
  3. Paste the Final URL from the top of the ad group tab first.
  4. Paste each headline into Headline 1 to Headline 15, and each description into Description 1 to Description 4.
  5. Paste Path 1 and Path 2. They are the two short words shown after your domain in the ad.
  6. Leave every headline position empty unless the sheet tells you to pin one.

Tip. This is the slowest step, because the headlines run down the sheet and Editor wants them across. Do one ad group completely before starting the next, so a headline never ends up in the wrong group’s ad.

Step 5

Add the negative keywords, in two runs.

Negatives are the searches you do not want to pay for. The sheet has two kinds, and Editor will not take both in one paste.

In the sheet tab: Negative Keywords
KeywordMatch TypeType
freeExactWrong intent
DIYBroadWrong intent
how to buildPhraseWrong intent
how to makePhraseWrong intent
plansBroadWrong intent
Five of the 74 campaign negatives. Below this table the sheet has a second one, for ad groups:
In the sheet tab: Negative Keywords
Ad Group (applied to)Negative KeywordMatch Type
Standing & Sit-Stand DesksalderfenExact
Standing & Sit-Stand Desksstanding desk saleExact
Monitor Arms & Desk Lightingdesk accessoriesExact
Three of the 14 ad group negatives. They stop one ad group taking searches that belong to another.
In Google Ads Editor
  1. Run one, campaign level. Select the campaign in the account tree.
  2. In the type list, choose Keywords and targeting › Keywords, Negative, then click Make multiple changes.
  3. Choose Use selected destinations and the option to add them as campaign-level negative keywords.
  4. Paste the Keyword and Match Type columns from the first table. Click Process, Finish and review changes, Keep.
  5. Run two, ad group level. Select one ad group, open Make multiple changes again, and this time choose ad group-level negative keywords.
  6. Paste the negatives the second table lists for that ad group. Repeat for each ad group named in the table.

Why the second table matters. Without it, a search for your brand name can be answered by a generic ad group, and a search for a sale can be answered by an ad with no offer in it. The ad group negatives route each search to the ad written for it.

Step 6

Add the sitelinks, callouts and structured snippets.

These are the extra lines and links that make an ad larger on the results page. Each ad group tab lists them under the ad copy.

In the sheet tab: Ad Group 2
AssetIn the sheetLimit
SitelinksLink text, two description lines and a URL25 and 35 characters
CalloutsShort phrases, such as a warranty or delivery promise25 characters
Structured snippetsA header and a list of values25 characters a value
In Google Ads Editor
  1. Sitelinks, callouts and structured snippets are stored once in the account and then attached to a campaign or an ad group.
  2. In Editor, create each asset in the shared library, then associate it with your campaign.
  3. Attach them at campaign level unless an asset only makes sense for one ad group.
  4. Aim for at least four sitelinks and four callouts on the campaign.

Tip. For a single campaign it is often quicker to post everything else first and add these in the Google Ads website, under Assets. They are a handful of short lines, and the website shows you a preview as you type.

Step 7

Check your changes, then post.

Editor will not post a campaign with errors in it, and it tells you what they are.

In the sheet tab: Pre-Launch Checklist
CheckWhat to look for
NetworksDisplay Network unticked
LocationsSet to presence
Broad match settingOff
Daily budgetMonthly budget ÷ 30.4
Final URL in each adThe page you mean to send people to
Start and end datesMatch the promotion
Six of the checks from the sheet’s own checklist. Work through all of it before you enable anything.
In Google Ads Editor
  1. Click Check changes. Editor marks anything it cannot post as an error and anything doubtful as a warning.
  2. Fix every error. Read every warning and decide whether it matters.
  3. Click Post, choose the campaign you built, and confirm.
  4. Open the Google Ads website and find the campaign. It should be there, complete and paused.
  5. Work through the rest of the checklist in the sheet, then enable the campaign when you are ready to spend.

Do not skip the last look. Posting paused means a mistake costs you nothing. Before you enable the campaign, click each final URL on your phone and read each ad group’s keywords one more time in the Google Ads website.

Five mistakes that cost money on day one.

None of them shows up as an error. Editor will post all five without complaint.

Keywords pasted without their match type

They become broad match, and your ads show for searches you never chose.

The Display Network left on

A Search budget starts paying for banner placements on other websites.

Locations left on presence or interest

People who are only reading about your area see your ads, wherever they are.

Every ad pointing at the home page

The searcher asked for one thing and lands on a page about everything.

The campaign posted as enabled

It starts spending before you have checked any of the above.

Google Ads Editor: the questions.

What is Google Ads Editor?

A desktop application from Google for managing Google Ads accounts offline. You download your account, make changes in bulk, check them, and post them back. It used to be called AdWords Editor.

Where do I download Google Ads Editor?

From Google’s own Google Ads Editor page. It is a free download. Download it here.

Can I upload a spreadsheet straight into Google Ads Editor?

Editor can import a CSV file, but only one laid out with its own column headings, one row for each keyword, ad or setting. A campaign brief written for people to read is not in that shape, which is why this guide pastes each part in turn.

Do I have to use Google Ads Editor?

No. Everything here can be done in the Google Ads website. Editor is faster once you have more than a few ad groups, because you can paste whole columns at once.

Can I undo something in Google Ads Editor?

Yes. Pasted changes are shown as proposed until you keep them, and nothing reaches your account until you post. You can also revert changes you have not posted.

Will the campaign start spending when I post it?

Only if its status is Enabled. Set the campaign to Paused in step 1 and it will post paused.

Does this work for Performance Max?

Performance Max can be built in Google Ads Editor, but it is more involved, because asset groups, images and audience signals work differently. This guide covers Search.

Can you do the upload for me?

Yes. If you have ordered an Omologist build, an optional $79 upload loads the finished campaign into your Google Ads account, paused, for you to check. See pricing.

Editor uploads the campaign. Someone still has to build it.

The spreadsheet in this guide is an Omologist build: keywords, ad groups, ad copy, negatives and a budget forecast, built for one page of your site and checked by a specialist. Delivered within 24 hours.

One-off price in US dollars · Optional upload into your account, $79