Google Ads Financial Services Verification

Advertising a finance offer on Google in Australia means passing Google financial services verification and meeting ASIC advertising rules at once. Who must hold the verification, what the landing page must disclose, and how to build the campaign after approval.

Last updated: 21 October 2026

In This Guide

  1. Executive Summary
  2. Benchmarks & Numbers at a Glance
  3. Does Your Offer Count as Financial Services Advertising?
  4. The Two Verifications You Need
  5. Choosing the Applicant Category
  6. Who Must Hold the Verification
  7. The Application Itself
  8. Landing Page Disclosures
  9. Writing the Ad
  10. Consumer Credit vs Business Credit
  11. Campaign Structure & Keywords
  12. Negative Keywords
  13. Targeting & Audience Limits
  14. Tracking & Value-Based Bidding
  15. The Landing Page Beyond Compliance
  16. Launch Timeline & 30/60/90-Day Plan
  17. Disapprovals, Suspensions & Appeals
  18. What Changed Recently
  19. References

1. Executive Summary: Five Principles Every Finance Advertiser Must Understand

This article covers the complete lifecycle of a Google Ads finance campaign targeting Australian users: from determining whether verification applies, through obtaining it, building compliant ads and landing pages, and then structuring, targeting and measuring a campaign that is allowed to serve. Sections 7 to 18 are published separately and cover landing-page copy, ad writing, campaign structure, keyword strategy, conversion tracking, the launch timeline, and what to do when things go wrong.

Before reading further, internalise these five principles. Every section that follows is an elaboration of one or more of them.

Principle 1: Google’s verification and Australian law are separate obligations. Completing Google’s Financial Services Verification does not mean your ads or landing pages comply with the Australian Consumer Law, the National Consumer Credit Protection Act 2009, the National Credit Code, or ASIC’s Regulatory Guide 234. Conversely, holding an Australian Financial Services Licence (AFSL) or Australian Credit Licence (ACL) does not automatically make your ads eligible to serve on Google.[1][2] Both tracks must be satisfied independently before launch.

Principle 2: The verification requirement is broader than most advertisers assume. Google applies its Australian financial-services verification requirement not just to banks and lenders, but to brokers, lead generators, comparison sites, affiliates, dealers promoting a lender’s finance offer, and any advertiser whose destination facilitates a financial transaction.[1] Australia’s enforcement date was 30 August 2022.[3] There is no blanket exemption for commercial or business-purpose lending.

Principle 3: There are two separate verification gates, and both must clear before ads serve. Advertiser identity verification (who you are) and Financial Services Verification (whether you are authorised to promote financial services) are distinct processes.[4] Most Australian applicants must also first obtain a verification code from Google’s third-party vendor, G2RS, before they can submit the Google application.[5] The gate that blocks serving is Financial Services Verification; identity verification alone is not sufficient.

Principle 4: Rate claims, qualifications and disclosures must be prominent, on-page and accurate. Google requires material disclosures to be visible without clicking, hovering or following a link.[1][6] Australian law requires comparison rates where an annual rate is stated, prohibits misleading overall impressions, and mandates balanced presentation of fees and conditions under ASIC RG 234 (updated 3 October 2026).[7][8] A disclaimer buried in fine print does not cure a misleading headline.

Principle 5: Campaign structure, conversion tracking and bid strategy decisions have compliance consequences, not just performance consequences. Optimising to a raw form submission rather than a qualified application can train Smart Bidding toward low-quality leads. Not capturing approval and settlement events within Google’s offline-import windows wastes the signals that justify a value-based bid strategy. These are structural decisions that must be made before launch, not retrofitted after spend has been wasted.

2. Benchmarks and Numbers at a Glance

Metric Typical range or threshold Applies when Source
Average CPC — accounting & finance A$10.20 Australian Google Search; vendor claim, sample size not stated [9]
Conversion rate — accounting & finance 3.2% Australian Google Search; vendor claim, sample size not stated [9]
Cost per lead — accounting & finance A$75 Australian Google Search; vendor claim, sample size not stated [9]
CPC range — finance & insurance A$4–A$18 Australian Google Ads, broad finance & insurance category; vendor claim [10]
CPL range — finance & insurance A$60–A$250 Australian Google Ads; vendor claim; based on stated 2% conversion assumption [10]
Conversion rate assumption — finance & insurance 2% Australian Google Ads; vendor modelling assumption, not a measured median [10]
CPC range — financial services & insurance A$20–A$50+ Australian Google Ads, competitive financial-services keywords; vendor claim [11]
CTR range — B2B finance (commercial lending, equipment finance) 3%–8% Australian Google Ads, B2B finance segment; vendor claim, sample size not stated [12]
CPL range — B2B finance (commercial lending, equipment finance) A$120–A$350 Australian Google Ads, B2B finance segment; vendor claim, sample size not stated [12]
CTR — finance & insurance search benchmark 2.91% Country not stated in source; vendor claim; use as directional reference only [13]
Financial Services Verification turnaround (G2RS + Google) 7–14 calendar days Australian applications; vendor claim, no guaranteed service level stated by Google [14]
Financial Services Verification processing — Google stage 3–10 business days General; vendor claim; country-specific processing applies; not an Australian-specific figure [15]
Lead-contact odds — response within 5 min vs 30 min 100× higher at 5 minutes US/multinational mortgage lead study; >15,000 leads, >100,000 call attempts; not Australian data [16]
Lead-qualification odds — response within 5 min vs 30 min 21× higher at 5 minutes US/multinational mortgage lead study; not Australian data; directional only [16]
Offline conversion import cutoff — standard upload 90 days after last click Google Ads standard offline conversion import; events after 90 days are not imported [17]
Offline conversion import cutoff — enhanced conversions for leads 63 days after last click Google enhanced conversions for leads; events after 63 days are not imported [17]

All Australian figures above are vendor claims published by digital agencies and tools, not peer-reviewed studies. Use them as directional planning inputs, not performance guarantees. The US/multinational lead-response figures are included for illustration only; no equivalent Australian study was identified in the available sources.

3. Does Your Offer Count as Financial Services Advertising?

What goes wrong if you skip this step: If you assume your offer is out of scope and launch without verification, Google will disapprove your ads or prevent them from serving in Australia—and in persistent cases may suspend the account—leaving zero impressions from day one of the campaign.[1]

The decision test

Apply this four-question test to every offer before building a single ad. If you answer yes to any question, treat the offer as caught by Google’s Australian Financial Services Verification requirement and do not launch until verification is complete.[1][2]

  • Question 1 — Does the ad or landing page mention a rate, repayment, credit limit, finance availability, fee, or borrowing term? A headline that says “rates from 5.99% p.a.” or “repay over 60 months” is sufficient to trigger this question. An ad that says only “buy now, pay later at checkout” is also caught.
  • Question 2 — Does the destination offer, arrange, compare, refer, match, or collect leads for a financial product or service? This catches brokers, lead generators, comparison sites, affiliates, and merchants whose landing page collects the visitor’s details and passes them to a lender—even if the merchant is primarily selling equipment, vehicles, or another non-financial product.
  • Question 3 — Is a third-party lender’s offer being promoted on the advertiser’s own site? If yes, Google can treat the advertiser—not only the lender—as the financial-services advertiser.[18] The obligation does not transfer automatically to the lender.
  • Question 4 — Could a reasonable user understand the ad or destination as an offer to provide, arrange, or facilitate access to financial services? This is the residual test. If the overall impression is financial, apply the verification requirement regardless of how the offer is labelled internally.

Offer types that are commonly caught

The following offer types should be presumed in scope unless a specific Google exemption applies and can be confirmed in writing with the verification provider and the advertiser’s legal advisers:

  • Personal loans, consumer credit, and credit cards
  • Chattel mortgages, equipment loans, and asset-backed business finance
  • Finance leases and operating leases with financing characteristics
  • Buy now, pay later (BNPL) and instalment payment plans
  • Mortgage and home-loan advertising
  • Insurance policies, quotes, brokers, and comparison services
  • Mortgage brokers, equipment-finance brokers, and loan arrangers
  • Lead-generation and referral sites connecting users with lenders[18]
  • Comparison and aggregator sites displaying financial product rates

The commercial lending misconception

There is no broad Australian Google Ads verification carve-out for business-purpose or commercial lending.[1] Google’s personal-loan policy excludes loans that finance the purchase of a fixed asset from its personal-loan definition,[18] but that exclusion limits only the personal-loan policy’s application. It does not remove a chattel mortgage, equipment loan, or business-purpose finance offer from the wider financial-services verification requirement. Treat commercial finance as in scope unless Google’s verification outcome expressly confirms otherwise.

Offers caught because of the advertiser’s role, not the product

A dealer, distributor, or merchant that promotes a lender’s finance offer on its own website is caught even though it is not the lender.[18] A broker advertising “compare business loans” is caught. A merchant whose product page says “finance available through [lender]” and links to an application form is caught. The practical test is whether the advertiser’s own site or ad facilitates a user taking a step toward a financial transaction—if it does, assume Google will treat that advertiser as a financial-services advertiser.

Worked example (illustrative)

Equipment dealer promoting a lender’s chattel mortgage offer

  • Setup: A regional excavator dealership advertising new machines on a A$6,000/month Search budget. The product landing page includes a section headed “Finance this machine” showing a representative weekly repayment and a “Get a finance quote” button that submits the visitor’s details to a partnered equipment-finance lender.
  • Numbers: At A$12.00 average CPC[10], A$6,000 buys approximately 500 clicks/month. If 3.2% convert to a finance enquiry[9], that is 16 finance leads per month. Zero of those leads serve if the advertiser launches without Financial Services Verification.
  • Decision: Apply the four-question test: the page mentions repayments (Q1 yes), collects leads for a lender (Q2 yes), promotes a third-party lender’s offer (Q3 yes). The dealership must obtain its own Financial Services Verification before running any ad that promotes or links to the finance offer. It cannot rely on the lender’s verification alone.
  • Why: Google’s policy treats an advertiser whose destination collects leads for a third-party lender as a financial-services advertiser subject to verification, regardless of whether the advertiser is itself the credit provider.[18]

ASIC does not regulate this—does that mean Google does not require verification?

No. Google’s Australian verification framework expressly states that the requirement can cover categories not regulated by ASIC.[2] “ASIC does not regulate this product” is not a safe assumption that verification is unnecessary. The position must be confirmed with G2RS and with the advertiser’s legal advisers.

4. The Two Verifications You Need, and the Order to Do Them

What goes wrong if you skip this step: Completing only advertiser identity verification—and assuming that is sufficient—means your financial-services ads will remain disapproved or ineligible to serve in Australia; the account appears verified yet the campaign delivers zero impressions.[3][4]

There are two distinct verification processes. They run in a fixed sequence. Completing both, in the correct order, is the gate on serving. The table below maps each step.

Step Who owns it How long it takes What it blocks Can it run in parallel
1. Advertiser identity verification — Google confirms the legal entity, business operations, payment profile and authorised representative managing the account The advertiser (or agency acting as authorised representative) Varies; no guaranteed deadline stated by Google. Allow at least 5 business days; re-verification required after significant payment-profile changes[19] Blocks all Google Ads serving if not completed when required; must be resolved before financial-services verification can be meaningfully relied upon Yes — begin immediately on account creation; do not wait for financial-services verification
2a. G2RS third-party verification — Google’s external vendor assesses whether the applicant is licensed, exempt, or a qualifying non-financial advertiser and issues a unique verification code The licensed or exempt financial-services entity (or its authorised representative); the agency cannot claim the lender’s licence as its own Vendor claim: 7–14 calendar days total for the combined G2RS + Google process[14]; 3–10 business days for Google’s stage alone (general figure, not Australia-specific)[15]; no guaranteed service level published by Google Blocks the Google Financial Services Verification submission — no code, no Google application Partially — the applicant can assemble documents and complete advertiser identity verification while preparing the G2RS application, but the Google form cannot be submitted without the G2RS code
2b. Google Financial Services Verification — Google applies a financial-services certificate to the Google Ads Customer ID after reviewing the G2RS code, licence details, domains and business information Google; the applicant submits via Google’s verification form with the G2RS code[4] Included in the 7–14 day vendor estimate; timing can extend if Google requests clarification or if business details do not match ASIC records[4] This is the actual gate on serving. Until the certificate is applied to the correct Customer ID, financial-services ads are disapproved or ineligible to serve in Australia[3] No — cannot begin until step 2a is complete and the G2RS code is in hand

The practical sequence

Start advertiser identity verification the moment the Google Ads account is created or taken over. While that is processing, assemble the documents needed for G2RS: legal business name consistent with ASIC records, physical address, AFSL or ACL number (where held), Google Ads Customer ID, domains, a description of the financial-services activities, and the name of the authorised representative. Submit to G2RS. Once G2RS issues the verification code, submit Google’s Financial Services Verification form. Confirm that the certificate appears against the correct Customer ID before launching any financial-services ad.[5][4]

A campaign should not be built or scheduled to launch before step 2b is confirmed complete. A verification that is “in progress” does not allow serving.

Worked example (illustrative)

Verification timeline for a 60-day equipment-finance offer opening 1 July 2026

  • Setup: A commercial equipment-finance lender holding an ACL wants to run a Search campaign promoting a 5.49% p.a. fixed-rate chattel mortgage. The offer window runs 1 July–31 August 2026 (62 days). The marketing manager initiates the verification process on 1 June 2026.
  • Numbers: Advertiser identity verification lodged 1 June; assume 5 business days, cleared 8 June. G2RS application lodged 8 June; vendor-claimed 7–14 calendar days means code arrives between 15–22 June[14]. Google review of the code: assume 5 business days from 22 June, certificate confirmed 29 June. Two days for ad review after campaign build: ads live 1 July. Total elapsed: 30 days, consuming zero days of the 62-day offer window.
  • Decision: Initiate both identity verification and document assembly on 1 June, submit to G2RS no later than 8 June, and build campaign assets in parallel so ads can be submitted for review the day the certificate is confirmed. Set campaign start date to 1 July with a hard pause rule if the certificate is not confirmed by 28 June.
  • Why: Google’s verification certificate must be applied to the correct Customer ID before ads can serve;[3] starting the process 30 days before launch consumes the worst-case 14-day G2RS window plus a 5-day Google review and still achieves day-one delivery.

5. Choosing the Applicant Category

What goes wrong if you skip this step: Selecting the wrong applicant category—for example, claiming to be a licensed advertiser when the relevant licence does not cover the advertised activity—will cause G2RS or Google to reject the application, restart the clock, and consume offer-window days while a corrected application is prepared.[5][2]

Google’s Australian process recognises three applicant categories. Each carries different warranting obligations and different rejection risks. The table below compares them. Confirm the appropriate category with G2RS and with the advertiser’s legal advisers before lodging; the position in this article is informational only and is not legal advice.

Category Who it is for What you are warranting Risk if you choose it wrongly
Licensed financial-services advertiser An entity directly authorised by the relevant Australian regulator—typically ASIC—to conduct the financial-services activities being advertised. The AFSL or ACL must cover the specific activity in the ad, not merely a related one.[5] That the entity is directly authorised; that the licence details are accurate and match ASIC registry records; that the domains, Customer ID and representative details submitted are correct; that the specific activities advertised are within the licence scope[5][4] If the licence does not cover the advertised activity, or if business details differ from ASIC records, G2RS will reject the application. Reapplication requires corrected documents and a new G2RS review cycle, consuming additional calendar days before any ads can serve.
Regulation-exempt advertiser An entity that is not required to hold the relevant licence or authorisation because a specific, substantive legal or regulatory exemption applies to its activities. “We are not regulated” is not sufficient; the exemption must be identifiable and activity-specific.[5][2] That the exemption applies to the exact activities being advertised; that supporting documentation, permits or approvals can be produced; that the advertiser is legally entitled to conduct or promote the relevant activity without the standard licence[5][2] If the claimed exemption is not substantiated with specific legal authority or regulator evidence, G2RS will reject the application. An exemption claimed on vague grounds such as “we are only a referrer” without documentary support is a common rejection point.
Non-financial-services advertiser A business that does not primarily promote financial services but has a legitimate reason to reach users searching for financial-services-related terms. Google’s own examples include automotive advertisers promoting financing as an ancillary offering, and online travel agents offering travel insurance.[1][3] That the business does not primarily provide or promote financial services; that any financial product mentioned is genuinely ancillary; that the advertiser does not present itself as a licensed financial-services provider; that the business rationale for targeting financial-services searches is credible and consistent with the actual ads, landing pages and products[1][5] If the actual ads, landing pages or business model show that financial services are a primary rather than ancillary offering, Google or G2RS can reclassify the application and reject it. Using this category as a workaround for an unlicensed financial-services operation is a policy violation that can lead to account-level enforcement.

Worked example (illustrative)

Category selection for a truck dealership whose finance arm holds its own ACL

  • Setup: A national truck dealership with a captive finance subsidiary. The subsidiary holds its own ACL covering credit activities (credit provider). The dealership’s Google Ads account runs product and finance campaigns under the same Customer ID. Monthly budget is A$15,000, of which A$5,000 is allocated to a 4.99% p.a. chattel mortgage offer.
  • Numbers: At A$20 CPC[11], A$5,000/month buys 250 clicks. At a 3% conversion rate, that is 7–8 finance enquiries per month. If the wrong category is selected and the application is rejected, a second G2RS application cycle adds 7–14 days[14] — at 250 clicks/month that is 58–125 clicks and 1–3 enquiries lost during reapplication.
  • Decision: The subsidiary applies as a licensed financial-services advertiser using its ACL number, with the dealership nominated as an authorised third party whose domains are listed in the application. The dealership’s Customer ID is used because it is the account running the ads.
  • Why: The ACL held by the subsidiary covers the specific credit activity (chattel mortgage as credit provider); the licensed entity must be accurately identified, and the Customer ID in the application must match the account that will serve the ads.[5][4]

6. Who Must Hold the Verification: Lender, Dealer or Agency

What goes wrong if you skip this step: If an agency or dealer assumes the lender’s verification automatically covers their own Google Ads account and launches without checking, every ad in that account is disapproved or ineligible to serve—and the lender’s verification certificate provides no protection because it is tied to a different Customer ID.[5][4]

Verification is account-level, not entity-level

Google’s Financial Services Verification certificate is applied to the Google Ads Customer ID submitted in the application.[5][4] It does not float across every account managed by the same agency, every account associated with the same lender, or every account in the same MCC. If the finance campaign runs from a different Customer ID than the one verified, the verification does not cover it.

Can a dealer or distributor hold the verification?

Yes, provided the dealer or distributor can accurately identify itself in one of the three categories described in Section 5. A dealer promoting a lender’s chattel mortgage offer as an ancillary service alongside product sales may qualify as a non-financial-services advertiser if the finance offering is genuinely ancillary and the landing page makes the lender’s identity and the dealer’s role clear.[1][3] A dealer whose primary pitch is the finance offer—whose headline, ad copy and landing page lead with rate and repayment—is more likely to be treated as a financial-services advertiser and will need to apply as licensed or exempt, which requires its own authorisation or documented exemption basis.

Can an agency hold the verification?

An agency can be the authorised representative who submits and manages the application, because Google defines the authorised representative as the party managing the Google Ads account and/or the payments profile.[3] However, the authorised-representative role does not give the agency the financial-services licence. The licensed entity must still be accurately identified in the application; the agency cannot claim to be the licensed advertiser unless it independently holds the relevant AFSL, ACL, or other authorisation.

In practice, the common structure is: the licensed lender (or ACL-holding broker) is the verified financial-services entity; the agency is identified as the authorised representative managing the account; the application records the correct Customer ID for the account that will run the ads.[5]

How a third party is nominated once the provider holds the verification

Where a licensed financial-services provider approves another party—such as a dealer, reseller, or affiliate—to promote its financial products, the approved provider nominates that third party through Google’s verification form.[4] The form asks for:

  • The Google Ads Customer ID of the account running the third-party’s ads
  • The third party’s domains and websites
  • A warranty from the licensed advertiser that it approves the financial promotions run by the third party[4]

This means the licensed entity must actively and expressly approve the third party. Approval is not automatic for every agency or affiliate connected to the lender. If the third party changes its domains, accounts, or payment profile, the nomination may need to be updated or resubmitted. Changing the verified legal entity, the Customer ID, or the approved domains without updating the application can invalidate serving eligibility for the affected account.

Worked example (illustrative)

Agency managing three dealer accounts under one lender’s verification

  • Setup: A finance lender holds an ACL and has completed Google Financial Services Verification for its own corporate Customer ID (CID-A). It appoints a digital agency to run Search campaigns promoting its 6.29% p.a. equipment-finance offer across three regional dealer accounts (CID-B, CID-C, CID-D), each spending A$3,000/month.
  • Numbers: At A$15 average CPC[10], each dealer account buys 200 clicks/month (600 combined). If CID-B and CID-C are nominated correctly but CID-D is omitted from the lender’s verification form, CID-D’s ads are disapproved from day one: 200 clicks × A$15 = A$3,000 in wasted budget allocation before the error is caught.
  • Decision: Before launching any dealer campaign, the agency confirms with the lender that all three Customer IDs—CID-B, CID-C and CID-D—and all three dealer domains are listed in the lender’s Google Financial Services Verification nomination. The agency does not assume the lender’s CID-A certificate covers the dealer accounts.
  • Why: Google’s verification certificate applies to the specific Customer ID in the application; third-party dealer accounts must be expressly nominated by the licensed provider with their own Customer IDs and domains recorded in the verification form.[5][4]

Managed for you

Everything on this page, handled every month

You are reading how to do it properly. Omologist does it, inside a written mandate, for 15% of your budget.

✓  Conversion tracking built and tested before any ad runs

✓  Search campaigns built to what your budget can actually feed

✓  Changes made inside a written mandate, not whenever

✓  A report on the 1st that says what was done and why

See the service and prices

15% of budget plus GST · minimum A$330 incl GST · accounts under about A$10,000 a month

7. The Application Itself: Evidence, Domains and Turnaround

What goes wrong if you skip this step: Submitting the G2RS application with mismatched legal names, wrong domains or missing licence documents causes rejection at the third-party verification stage, restarting a process that takes 7–14 calendar days per attempt and can consume weeks of a short offer window before a single ad serves.[14][15]

7.1 Assemble the evidence before you open the form

G2RS’s application interface for Australia requests information that must be internally consistent across every source it can cross-check: the Google Ads account, the ASIC registry, the Google payments profile, and the advertiser’s own domain. Discrepancies between any two of these are a common cause of rejection. Prepare the following before opening the application:[4][5]

  • Legal entity name — exactly as it appears on the ASIC register, not the trading name or brand name.
  • ACN or ABN — whichever is registered with ASIC; confirm it is current and not deregistered.
  • AFSL or ACL number — the specific licence number for the activity being advertised. A licence covering financial-product advice does not automatically cover credit activities, and vice versa.
  • Physical business address — matching the ASIC register; a PO Box alone is insufficient.
  • Google Ads Customer ID — the ten-digit ID of the account that will run the ads, not a manager account ID.
  • Payments profile details — the name and billing entity on the Google Ads payments profile must be reconcilable with the legal entity applying.
  • Advertised domains — every domain that will appear as a final URL or display URL in the approved campaigns. A domain not listed at verification cannot benefit from the certificate on that application.
  • Authorised representative details — the person submitting the application must be authorised to act for the legal entity and to manage the Google Ads account or payments profile.[3][5]
  • Supporting documents for exemption claims — if the applicant is not licensed but relies on a regulatory exemption, G2RS allows up to two documents to be uploaded.[2]

7.2 Domains: what counts as listed and what does not

Google’s verification is applied at the account and domain level, not at the campaign or keyword level. A domain added to a campaign after verification is complete may not be covered. If the advertiser uses separate domains for different products — for example, one domain for equipment finance and another for novated leasing — each domain must be included in the application or a supplementary update. Subdomains of a verified apex domain are generally covered, but confirm this with the verification provider rather than assuming it.[4][5]

7.3 Turnaround times and their effect on a campaign launch

Published vendor estimates indicate G2RS processing takes 3–10 business days and the combined Google review takes 7–14 calendar days in total.[14][15] These are vendor claims, not guaranteed service levels, and depend on application completeness, ASIC registry match, and whether clarification is requested. The safe planning assumption is 14 calendar days from G2RS submission to Google certificate, plus 1–2 business days for subsequent ad review.

Worked example (illustrative)

Equipment finance offer with a 60-day window — verification timeline

  • Setup: A national equipment-finance lender with a valid ACL wants to run a Search campaign promoting a 6.49% p.a. chattel mortgage offer available until 30 November 2026.
  • Numbers: G2RS application lodged 1 October 2026; 10-business-day G2RS turnaround = G2RS code received 15 October; Google review takes a further 5 calendar days = certificate applied 20 October; ad review 2 business days = first impression 22 October. The offer window opened 1 October, so 21 days are consumed before the first impression. Remaining window: 39 days of the original 60.
  • Decision: Lender lodges the G2RS application no later than 15 September 2026, targeting a certificate by 1 October and ads live by 3 October, preserving the full 58 days of usable budget.
  • Why: Google’s verification applies across all ad formats and assets, so no impression can legally serve until the certificate is in place; the 7–14 day total turnaround estimate from published sources means a mid-window application sacrifices a third of the offer period.[2][14][15]

7.4 Rejection and reapplication

If G2RS rejects the application, it will state a reason. The most common correctable causes are: a legal name that does not match the ASIC register; a licence number that does not cover the advertised activity; a domain not yet live or returning an error; or a payments profile entity that differs from the applying entity. Correct the specific stated issue, obtain a fresh G2RS verification code, and resubmit to Google. Do not submit the original code a second time after rejection; Google requires the code from the current approved G2RS review.[4][5]

Worked example (illustrative)

Rejection caused by licence scope mismatch — process cost

  • Setup: A commercial finance broker with an ACL covering mortgage broking applies to G2RS to advertise equipment-finance lead generation. The ACL covers credit assistance for mortgages only, not equipment-finance credit activities.
  • Numbers: First application lodged 6 October 2026; rejection received 16 October (10 business days); corrected application (new ACL authorisation confirmed with legal adviser, reapplication lodged) 23 October; second G2RS code received 5 November; Google certificate applied 10 November; ads live 12 November. Total delay: 37 calendar days. On a $12,000 monthly budget across a 60-day offer window ending 30 November, only 18 days of budget remain: $12,000 × (18/30) = $7,200 spendable, against a planned $24,000.
  • Decision: Broker confirms ACL scope with its compliance team before lodging any application, and applies 6 weeks before the planned launch date.
  • Why: G2RS requires the licence or exemption to cover the specific activity being advertised; a licence for a different credit activity is treated as no licence for this purpose.[2][5]

8. Landing Page Disclosures That Pass Review

What goes wrong if you skip this step: A landing page that places required disclosures behind an accordion, in a linked PDF or only in a tooltip will trigger a “Financial products and services: insufficient disclosures” disapproval under Google policy, and may simultaneously breach ASIC RG 234’s requirements for prominent, balanced presentation — producing both a Google enforcement problem and a legal exposure.[7][20][21]

8.1 The “immediately visible” standard

Google requires that disclosures on a financial-services landing page be clearly and immediately visible without clicking, hovering, expanding or navigating elsewhere.[1][6] That standard is higher than most finance websites currently meet. The checklist below sets out each required element, where it must physically appear on the page, and what implementations fail the test.

Requirement Where it must appear What counts as a failure
Full legal entity name (not trading name alone) Header or footer, visible on initial page load without scrolling past a full-screen hero Brand name only; entity name in linked ABN lookup; entity in a collapsed “About” section
Physical Australian business address Footer, rendered as plain text on the page PO Box only; address in a separate “Contact” page linked from footer; address in a downloadable PDF
AFSL or ACL number (where applicable) Adjacent to the entity name in the footer or directly below the main rate claim Licence number in a linked financial-services guide; number visible only after clicking “Learn more”
Role disclosure (lender, broker, referrer, lead generator) Near the lead form or “Apply” button, in plain English Role buried in 200-word terms-of-use link; no disclosure of who receives the lead
Advertised interest rate and rate type (fixed/variable) Adjacent to the headline rate claim, same visual unit Rate type disclosed only in linked terms; “from” qualifier two screens below the rate
Comparison rate and prescribed warning (credit ads) Immediately below or beside the interest-rate claim; warning directly after the comparison rate[22][23] Comparison rate on a separate repayments page; warning in footer 1,500px below the rate claim
All associated fees and charges On the page, in readable text, before or adjacent to the “Apply” or “Get Quote” action[1][6] Fee schedule in a linked PDF; “fees may apply” without amounts; fees visible only after the form is submitted
Minimum and maximum repayment period (personal loan ads) In the disclosed loan parameters block, above the fold or directly beside the representative example[18] Term range in a dropdown visible only when the user interacts with a calculator
Maximum APR, separate from the representative example (personal loan ads) In the disclosed loan parameters block, stated as a distinct line item[18] APR embedded within the representative example text only; APR visible only when a slider is moved
Representative total-cost example including all fees (personal loan ads) Static visible text on the page, not generated dynamically without a default state[18] Example appears only after the user enters values into a calculator; example in a linked brochure
Third-party accreditation links (where asserted) On the page, linked to the accrediting body’s confirmation[1][6] Logo displayed without a working link; logo linking to an internal page asserting the accreditation

8.2 Comparison rate: the Australian-specific requirement

Under National Credit Code s 164(1)–(2), a comparison rate in a credit advertisement must be identified as a comparison rate and must not be less prominent than any annual percentage rate or repayment amount stated in the same advertisement.[22][23] The prescribed short warning must appear immediately after the comparison rate and must identify the loan amount and term on which it is calculated. The warning reads, in prescribed form: “WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.”[23]

Worked example (illustrative)

Compliant disclosure block for a chattel mortgage landing page

  • Setup: A lender advertising a 6.49% p.a. fixed-rate chattel mortgage for business equipment purchases between $20,000 and $150,000 over 36–60 months, with a $595 establishment fee and no ongoing monthly fee.
  • Numbers: Representative example: $75,000 borrowed over 60 months at 6.49% p.a. fixed; monthly repayment $1,461; comparison rate 6.85% p.a.; total repayable $87,660 including $595 establishment fee. WARNING text follows immediately. Block placed in static HTML 180px above the “Apply Now” button. Page load shows this block without scrolling on a 1,080px-height viewport.
  • Decision: Lender places the full disclosure block — rate, comparison rate, warning, term range, fees, entity name and ACL number — as a single static HTML section, not in a collapsible accordion or JavaScript-rendered calculator with no default state.
  • Why: Google requires fees and disclosures to be immediately visible without clicking or hovering; National Credit Code s 164 requires the comparison rate to be no less prominent than the interest rate, with the prescribed warning immediately following.[1][6][22][23]

9. Writing the Ad: Rate Claims, Qualifiers and Australian Consumer Law

What goes wrong if you skip this step: An ad that states “From 5.99% p.a.” without the qualifier “subject to approval” in the ad text itself — relying on the landing page to carry the limitation — can be judged misleading by ASIC under RG 234 and disapproved by Google for misrepresentation, because the overall impression conveyed to users before they click is that the rate is broadly available.[7][20]

9.1 Qualifiers that must travel in the ad, not only on the landing page

ASIC RG 234 requires material qualifications to be sufficiently prominent and proximate to the claim they qualify. Google’s misrepresentation policy treats the ad as the initial representation; a qualification that appears only on the landing page does not correct the impression already created by the headline.[7][20] The following qualifiers must appear in the ad itself whenever the corresponding claim is made:

  • “From” or range marker — if the rate is a minimum, the word “from” must appear in the same headline as the figure, not only in a description line.
  • “Subject to approval” — any rate or benefit conditional on credit assessment must carry this phrase in the ad. It need not be in every headline but must appear in at least one description line.
  • Offer expiry date — if the ad presents a time-limited rate, the expiry must be stated in the ad (e.g. “Offer ends 30 Nov 2026”). An expiry mentioned only in the landing page footer does not satisfy Australian Consumer Law s 18, which assesses the impression conveyed.[24]
  • Customer or asset eligibility restriction — if the rate is available only to new customers, ABN holders, or a specific asset class, that limitation must appear in the ad description.
  • Loan amount and term basis for a comparison rate — where a comparison rate is stated in the ad, the amount and term on which it is calculated must appear in the same ad unit (headline or description), because the National Credit Code requires the comparison-rate example to identify these figures.[23]

9.2 Compliant and non-compliant headline and description examples

The following examples are illustrative and do not represent any real offer.

Non-compliant example A — “from” rate with no qualifier in the ad

  • Headline 1: Equipment Finance From 5.99%
  • Headline 2: Fast Online Application
  • Description: Finance new and used business equipment. Apply today and get a decision quickly.

Failure reason: “From 5.99%” implies broad availability; “subject to approval” and the basis of the rate are absent from the ad. The overall impression is that 5.99% is the general rate, which is likely misleading under ACL s 18 where most applicants receive a higher rate.[7][24]

Compliant example A — “from” rate with required qualifiers in the ad

  • Headline 1: Equipment Finance From 5.99% p.a.
  • Headline 2: New & Used Assets | ABN Holders
  • Description: Fixed-rate chattel mortgage from 5.99% p.a. (comparison rate 6.35% p.a. on $75k/60m). Subject to approval. Offer ends 30 Nov 2026. Fees apply.

Non-compliant example B — approval language implying certainty

  • Headline 1: Instant Equipment Finance Approval
  • Headline 2: No Credit Checks Required
  • Description: Get approved for equipment finance today. All industries welcome.

Failure reason: “Instant approval” and “no credit checks” are claims ASIC identifies as requiring particular scrutiny; they imply certainty of approval and absence of assessment, which will be false for any responsibly underwritten product.[7] Google’s policy prohibits guaranteed-approval claims.[20]

Compliant example B — application speed without implying guaranteed approval

  • Headline 1: Business Equipment Finance
  • Headline 2: Online Application | Fast Decision
  • Description: Apply online in under 10 minutes. Decisions typically within 1 business day, subject to credit assessment. Rates from 5.99% p.a. for eligible ABN holders.

9.3 The comparison-rate trigger in an ad

If the ad states an annual interest rate or annual percentage rate, National Credit Code s 160 triggers the comparison-rate requirement for a credit advertisement.[22] The comparison rate must not be less prominent than the interest rate (s 164). In a text ad, this means the comparison rate must appear in the same ad — in a description line if not the headline — alongside the loan amount and term basis and the prescribed warning. Because the warning text is long, ads commonly state “Comp. rate [X]% p.a. on $[amount]/[term]m. Fees & charges apply. See site for full comparison rate warning.” The full prescribed warning must then appear immediately after the comparison rate on the landing page.[23]

Worked example (illustrative)

Budget impact of a disapproved rate-claim ad on a short offer window

  • Setup: A finance broker running a Search campaign with a $9,000/month budget promoting a “from 5.49% p.a.” commercial vehicle finance offer. The ad is disapproved on Day 1 for misrepresentation (no “subject to approval”, no comparison rate). The broker corrects and resubmits; Google ad review takes 2 business days.
  • Numbers: At $9,000/month the daily budget is $300 ($9,000 ÷ 30). Two days of zero serving = $600 of lost budget capacity. At an Australian finance CPC of $10.20[9], those 2 days would have generated 600 ÷ 10.20 = 59 clicks; at 3.2% conversion[9], 59 × 3.2% = 1.9 enquiries lost. Across a 45-day offer window this equals a 4.4% reduction in reachable enquiry volume.
  • Decision: Broker pre-clears every headline and description against the compliant template above before the campaign launches, submitting for internal legal review at least 5 business days before the go-live date.
  • Why: Google’s ad review runs after submission; there is no pre-clearance mechanism, so a disapproval always consumes at least one review cycle of 1–2 business days from a live offer window.[20]

Not ready to change anything today?

We post the sharpest bits of these guides — what a change is worth, how long it takes to show up, and when to leave it alone. Short enough to read on your phone.

Follow on LinkedIn Follow on Instagram

10. Consumer Credit versus Business Credit: the Line That Changes Everything

What goes wrong if you skip this step: Advertising a product as “business finance” when some borrowers use it for personal purposes, or failing to identify that a particular borrower type triggers the National Consumer Credit Protection Act 2009, exposes the advertiser to ASIC enforcement for failing to hold an ACL, breaching responsible-lending obligations and omitting mandatory credit-advertisement disclosures — none of which are fixed by Google verification alone.

10.1 The legislative line

The National Consumer Credit Protection Act 2009 (Cth) (NCCP Act) and the National Credit Code (NCC) apply to credit that is provided to an individual and is either wholly or predominantly for personal, domestic or household purposes, or is secured by a mortgage over residential property.[25][26] Business-purpose lending — credit provided to a company or individual where the predominant purpose is a business or investment purpose — generally falls outside the NCC.[25]

When the NCC applies, the following obligations attach that do not exist for pure business credit:

  • The credit provider or broker must hold an ACL or be an authorised credit representative.[25]
  • Responsible-lending conduct obligations apply, including a suitability assessment.[25]
  • The credit advertisement must include the comparison rate where an annual percentage rate is stated, with the prescribed warning.[22][23]
  • Specific pre-contractual disclosure documents (credit guide, quote, credit contract) are required.[25]
  • The advertiser must not make false or misleading representations about credit.[25]

10.2 What must appear in the advertisement itself when NCC applies

Once an advertisement is a “credit advertisement” under the NCC, the following must appear in the ad itself (not only on the landing page) where the relevant trigger is present:[22][23]

  • The comparison rate, if an annual interest rate or APR is stated — no less prominent than the interest rate.
  • The loan amount and term on which the comparison rate is calculated.
  • The prescribed comparison-rate warning (short form acceptable in space-constrained ads, full form required on the landing page).

These are statutory obligations under the NCC, independent of Google policy. An advertiser cannot satisfy them by placing only a rate on the landing page.

10.3 Borrower types most likely to blur the line

The following borrower types present the highest risk of a consumer-credit classification applying to a product marketed as business finance:

Borrower type Risk of NCC application Key trigger
Sole trader financing equipment they also use personally High Predominantly personal-use purpose test; individual borrower
Partnership where partners are individuals, not companies Medium–High Individual partners may be borrowers; mixed-use assets
Small company director providing personal guarantee on loan secured by their home High for the guarantee; NCC can apply to residential mortgage security Residential property security triggers NCC regardless of purpose
Trustee of a family trust borrowing for a property investment Medium Depends on trust structure; individual trustee may be the credit customer
ABN holder operating a personal vehicle as a “business vehicle” High if vehicle is predominantly personal-use Predominant-purpose test applied to actual use, not borrower’s stated purpose
Employee salary-packaging or novated lease advertised to individuals High Individual consumer; personal benefit; finance structured through employer but credit exposure is individual

10.4 The Google Ads consequence

Google’s personal-loan policy applies to lending to an individual consumer on a nonrecurring basis, excluding fixed-asset finance.[18] If a product marketed as equipment finance is actually provided to individual consumers for predominantly personal purposes, the personal-loan policy’s disclosure requirements — minimum and maximum repayment period, maximum APR, representative example — may apply in addition to NCC obligations. An advertiser cannot escape the personal-loan policy simply by labelling a consumer product as “business finance”.[18]

Worked example (illustrative)

Sole-trader campaign triggering NCC obligations on a “business finance” landing page

  • Setup: A lender advertising chattel mortgage finance for sole traders purchasing utes and vans. The landing page states “Business Vehicle Finance — No Consumer Credit Obligations Apply” but the application form accepts individual ABN holders and asks for personal income details.
  • Numbers: If 40% of applicants are sole traders using the vehicle for mixed personal and business purposes, and the predominant-use test identifies those as consumer credit, the NCC applies to those applications. The ad states 6.99% p.a. interest but no comparison rate. Under NCC s 164 the comparison rate must appear in the credit advertisement no less prominently than the 6.99% figure. Omitting it exposes the lender to NCC civil penalty provisions. At a $15,000/month ad spend generating approximately 1,471 clicks ($15,000 ÷ $10.20[9]) and 47 applications (1,471 × 3.2%[9]), 40% = 19 applications per month may be NCC-regulated transactions.
  • Decision: Lender adds the comparison rate (7.35% p.a. on $30,000/60m), prescribed warning and ACL number to all creative and the landing page, and restricts the application form to company ABN holders to support a business-purpose classification for those borrowers.
  • Why: The NCC applies based on the purpose of the credit and the type of borrower, not the label the lender attaches to the product; the comparison-rate obligation under NCC s 160 is statutory.[22][23][25]

11. Campaign Structure and Keyword Strategy for a Finance Offer

What goes wrong if you skip this step: A single campaign mixing rate-comparison, asset-specific and brand keywords will exhaust its daily budget on high-volume generic terms such as “business loan”, return undifferentiated reporting, make it impossible to apply separate bid logic to different intent signals, and prevent meaningful optimisation toward qualified applications rather than raw clicks.

11.1 Campaign types available to a finance offer

Campaign type Best for Strengths Weaknesses Minimum viable monthly budget
Search — exact/phrase match Core acquisition; rate-shopper and asset-specific intent High intent; query-level compliance control; clear search-term reporting Limited scale on narrow equipment terms; higher CPC on competitive finance queries $5,000/month (supports ~490 clicks at $10.20 CPC[9]; ~16 enquiries at 3.2%[9])
Search — broad match with Smart Bidding Demand discovery after exact/phrase coverage is stable Finds adjacent intent; expands reach without manual keyword gaps Requires reliable conversion data; higher negative-keyword maintenance; can drift into consumer-finance queries $8,000/month to provide sufficient conversion signal (target 15+ conversions/month for stable bidding)
Performance Max Cross-channel reach after Search is proven; remarketing Reaches Search, Display, YouTube, Discover, Gmail, Maps; automation finds converting users Lower transparency; harder to ensure every placement is disclosure-compliant; competes with Search for budget $10,000/month (needs strong conversion volume and audience signals to outperform Search alone)
Demand Gen Awareness of a seasonal offer; remarketing to quote-page visitors Visual formats; YouTube + Discover + Gmail; audience-based targeting Interruption-based; finance claims reach non-seeking users; creative compliance across all asset combinations required $6,000/month (image/video production cost adds to effective minimum)
Display — remarketing only Re-engaging application-started or rate-page visitors Low CPC; keeps brand visible during consideration; supports longer finance decision cycles Poor cold-prospecting lead quality; broad contextual reach can serve on non-finance pages $2,000/month as a remarketing supplement to Search

11.2 Recommended campaign structure

Separate campaigns by intent type, not only by keyword. The three core campaigns for a finance offer are:

  • Rate/cost intent campaign: exact and phrase match around terms such as [equipment finance rates], “chattel mortgage rate”, [compare equipment loan rates]. Landing page: full rate table with comparison rates, fees and representative example. Goal: quote or application.
  • Asset/product intent campaign: exact and phrase match around asset categories such as [forklift finance], “excavator finance”, [commercial vehicle finance]. Landing page: asset-specific offer with finance as the value proposition. Goal: finance application.
  • Brand + finance campaign: brand keyword combinations such as [brand name equipment finance], “brand name chattel mortgage”. Landing page: brand-specific product page. Goal: retention and cross-sell of existing customers.

11.3 Ad group structure within each campaign

Within the rate/cost and asset/product campaigns, group keywords by asset category or loan type: one ad group for vehicle finance, one for construction equipment, one for food-service equipment, and so on. Each ad group should use ad copy and a landing page specific to that asset class. Avoid grouping all equipment types into a single ad group, which prevents relevant headline customisation and reduces Quality Score.

Worked example (illustrative)

Three-campaign structure on a $15,000 monthly budget

  • Setup: A commercial finance broker advertising chattel mortgage and equipment-loan products for assets between $20,000 and $500,000, targeting businesses across Australia.
  • Numbers: Rate/cost intent campaign: $6,000/month; at $10.20 average CPC[9] = 588 clicks; at 3.2% conversion[9] = 19 enquiries. Asset/product intent campaign: $7,000/month = 686 clicks; at 3.2% = 22 enquiries. Brand campaign: $2,000/month = 196 clicks; at higher brand conversion rate of 8% (brand intent) = 16 enquiries. Total estimated monthly enquiries: 19 + 22 + 16 = 57. At a B2B finance CPL benchmark of $120–$350[12], $15,000 ÷ 57 = $263/enquiry, within the published range.
  • Decision: Budget is split $6k/$7k/$2k across the three campaigns, with rate and asset campaigns using Manual CPC for the first 30 days until 30+ conversions are recorded, then switching to Maximise Conversions with a target CPA of $280.
  • Why: Smart Bidding requires a minimum of approximately 30 conversions per month per campaign for stable optimisation; at 19–22 enquiries per campaign the rate and asset campaigns are close to threshold and should be combined into a single campaign if conversion volume falls short.[17]

12. Negative Keywords and the Traffic You Do Not Want

What goes wrong if you skip this step: Without a negative keyword list built before launch, a business-equipment-finance campaign running broad or phrase match will immediately begin spending on “personal loan calculator”, “finance jobs”, “how to get out of debt” and “bad credit car loan” — clicks that cost $10–$50 each[10][11], convert at near zero and distort the Smart Bidding signal away from qualified commercial applications.

12.1 The five negative-keyword themes for a business finance campaign

The following themes each carry distinct traffic types that a commercial-finance campaign does not want. Each theme includes example terms to add as exact, phrase or broad-match negatives depending on the keyword strategy in use.

Theme 1: Consumer and personal-credit traffic — users seeking personal, not business, finance. Add these if the product is business-only:

  • personal loan, personal finance, personal credit, payday loan, payday lender
  • bad credit loan, bad credit finance, no credit check loan, guaranteed approval loan
  • home loan, mortgage, car loan, vehicle loan (if the product does not cover these)
  • credit card, buy now pay later, BNPL, afterpay, zip pay
  • debt consolidation, debt help, hardship, financial hardship

Theme 2: Job seeker and employment traffic — finance keywords overlap heavily with “finance jobs” searches:

  • finance jobs, equipment finance jobs, finance manager, finance broker jobs, lending jobs
  • finance career, finance salary, finance course, finance degree, finance internship
  • junior finance, senior finance (when used as job-title terms)
  • finance analyst, financial planner jobs, credit officer

Theme 3: Information and research traffic with no purchase intent:

  • what is equipment finance, how does chattel mortgage work, equipment finance definition
  • equipment finance wiki, finance calculator (if a calculator alone has no conversion value)
  • template, spreadsheet, example, sample, guide, tutorial

Theme 4: Competitive or unserviceable terms — competitor brand names (unless competitor bidding is a deliberate strategy reviewed by legal advisers), product types the lender does not offer, and regions the lender cannot serve:

  • Specific competitor brand names if not bidding on them deliberately
  • Student loan, HECS, HELP (if not offering education finance)
  • Agricultural loan, farm finance (if not offering rural finance)
  • Construction loan, development finance (if not a property lender)

Theme 5: Free-resource seekers:

  • free equipment finance, free business loan, government grant, small business grant
  • free calculator, free comparison, free quote without intent to apply
  • not-for-profit finance, charity finance (unless served)

12.2 Terms that specifically pull consumer-credit traffic into a business-finance campaign

The following terms appear plausibly business-adjacent but predominantly draw consumer or non-commercial traffic in Australian search data and should be added as negatives to a commercial-equipment-finance campaign from launch:

  • car finance, car loan, used car finance — unless the product covers commercial vehicle finance and the campaign intends to capture it
  • trailer finance — high consumer-trailer volumes alongside commercial; segment carefully
  • solar finance, solar loan — heavy consumer residential solar volume
  • laptop finance, phone finance — consumer electronics rather than commercial equipment
  • bad credit equipment finance — if the product does not serve impaired credit; also creates ACL risk if approval claims are made
  • no deposit finance — often consumer search intent; also triggers comparison against BNPL products

12.3 Managing the negative list over time

A negative keyword list built before launch is a starting point, not a finished product. Search-term reports must be reviewed at least weekly for the first 60 days. Add new negatives at the ad-group level where the irrelevant term is specific to one asset category, and at the campaign level where it contaminates all ad groups. Use a shared negative list in Google Ads for terms that apply across all finance campaigns to avoid maintaining separate copies.[27]

Worked example (illustrative)

Cost of missing “jobs” negatives on a broad-match equipment finance campaign

  • Setup: A lender running a $10,000/month broad-match Search campaign for “equipment finance” terms in Australia, without job-seeker negatives. After 14 days the search-term report shows 18% of spend on employment-related queries: “equipment finance manager salary”, “equipment finance jobs Sydney”, “finance broker jobs Melbourne”.
  • Numbers: $10,000/month = ~$333/day. Over 14 days: $333 × 14 = $4,662 total spend. 18% on job-seeker terms = $4,662 × 18% = $839 wasted. At $10.20 CPC[9] that is $839 ÷ $10.20 = 82 clicks generating zero qualified applications. At 3.2% conversion on the remaining 82% of spend, lost enquiry opportunity = 82 × (18%/82%) × 3.2% ≈ 0.58 enquiries per day diverted to zero-value traffic over the 14-day period.
  • Decision: Add exact-match negatives [finance jobs], [equipment finance jobs], [finance manager], [finance broker jobs], [finance career], [finance salary] to the campaign before launch; review the search-term report at Day 3, Day 7 and Day 14 and add further employment terms as they appear.
  • Why: Broad-match keywords expand to semantically related queries including job-title and career searches, which share vocabulary with finance-product searches; Smart Bidding cannot distinguish a job seeker from a borrower without conversion signal, and the signal from zero-converting clicks degrades bid optimisation.[27]

“So what do I actually have to do?”

Tell us the business and give us the account. We build the conversion tracking and prove it works with a test conversion before any ad runs, then launch the campaigns your budget can feed.

After that, changes happen inside a written mandate, so you know in advance what gets changed without asking and what never gets touched. A report on the 1st, a budget email around the 23rd, and nothing else unless it needs your yes or no.

How it works

13. Targeting, Audiences and Personalised Advertising Limits

Failure mode: Using a prohibited demographic signal or a sensitive financial-inference audience triggers a personalised-advertising violation that can disapprove every ad in the campaign simultaneously, pausing all spend without warning.

Google’s most explicit personalised-advertising restrictions for consumer finance — prohibiting age, gender, parental status, marital status and US ZIP-code targeting — apply expressly to the United States and Canada, not to Australia.[1] Australian campaigns are not automatically subject to those specific signal restrictions. However, Australian advertisers must still comply with Google’s broader personalised-advertising rules, the Australian Privacy Act 1988, the Australian Consumer Law and applicable financial-services obligations. Google approval of an audience configuration does not constitute legal compliance.

13.1 What Australian finance campaigns can and cannot do

Targeting method Australian position Risk note
Location (state, territory, city, radius) Permitted — target only states or postcodes the lender can serve Low, if the offer is genuinely available in that location
Age and gender Not subject to the US/Canada access-to-opportunities restriction in Australia[1] Medium — avoid if the effect is to exclude protected groups from a broadly available product
In-market audiences (e.g. “Business Loans”, “Commercial Vehicles”) Permitted with standard Google audiences Low — use Google’s predefined segments; do not build custom segments from sensitive data
Customer Match — first-party enquiry list Permitted where data is lawfully collected, disclosed and consented to under Australian law High if list includes declined applicants, financially vulnerable users or data without adequate notice
Remarketing — visited rate page Permitted; ensure privacy policy discloses advertising use Low-medium
Inferred financial hardship or debt distress Not permitted — Google prohibits targeting based on sensitive personal attributes[1] High — also engages Australian Privacy Act obligations
Ad copy implying knowledge of user’s financial state Prohibited — e.g. “Struggling with cash flow?” directed at an inferred distress segment High — personalised-ad violation and potential ACL s 18 issue

13.2 Customer Match for a finance funnel

Customer Match is not a universal entitlement. For Australian finance campaigns: upload only data collected directly from the customer with adequate privacy notice; never upload purchased or broker-sourced lists; exclude declined applicants and opted-out users; and do not combine the list with inferred income, creditworthiness or hardship signals.[1] The advertiser remains responsible for compliance with the Privacy Act 1988 regardless of whether Google accepts the upload.

13.3 Audience strategy by funnel stage

  • Top of funnel: In-market audiences (“Business Finance”, “Commercial Vehicles”), broad geographic targeting, keyword contextual signals.
  • Mid-funnel: Remarketing to rate-page and calculator visitors; similar segments built from qualified enquiry lists.
  • Bottom of funnel: Customer Match to existing approved customers for cross-sell; suppression list for settled loans to avoid wasting spend.

Worked example (illustrative)

Remarketing budget allocation across a 60-day equipment finance offer

  • Setup: A national equipment financier running a 5.49% p.a. fixed-rate chattel mortgage offer from 1 November to 31 December 2026, with a $18,000 total campaign budget.
  • Numbers: Search campaign allocated $13,500 (75%); remarketing allocated $4,500 (25%). Australian B2B finance benchmark CPC A$20–A$50[11] — mid-point $35 used. Search budget: $13,500 / $35 = 386 clicks. At 3.2% conversion rate[9] = 12 enquiries. Remarketing list builds over weeks 1–3; $4,500 / $12 estimated remarketing CPL = 375 remarketing re-engagements attempted.
  • Decision: Remarketing list excludes any user tagged with a “hardship” custom intent signal; audience is set to “Optimised targeting off” to prevent Google from expanding to inferred distress segments.
  • Why: Google’s personalised-advertising policy prohibits targeting based on sensitive personal attributes including inferred financial difficulty, regardless of the Australian exemption from the US/Canada demographic restrictions.[1]

14. Conversion Tracking, Lead Quality and Value-Based Bidding

Failure mode: Optimising Smart Bidding to raw form submissions rather than qualified applications drives high click volume at low apparent CPL while producing applications that never settle, destroying the true return on ad spend and wasting the entire campaign budget.

A finance funnel has at least four distinct trackable events. Collapsing them into a single “form submitted” conversion action gives Smart Bidding a misleading signal and produces a CPL figure that bears no relationship to the cost per funded loan.

14.1 Events worth counting

Event Google Ads treatment Recommended conversion type
Form started Secondary — diagnostic only Micro-conversion; do not include in primary goal
Application submitted Secondary during early data collection; primary only if approval volume is too low to optimise Count; tag with GCLID at submission
Application qualified / credit-assessed Primary conversion once reliably defined Offline import from CRM; use as Smart Bidding signal
Approval / conditional approval Primary conversion — stronger commercial signal Offline import; assign expected settlement value
Settlement / funded Primary value conversion where volume and latency permit Offline import with actual or modelled margin value

14.2 Offline conversion import

Capture the Google Click ID (GCLID) at first page visit and store it alongside the application record in the CRM. Import approval and settlement events via Google’s offline conversion import (OCI) or enhanced conversions for leads (ECL). Google’s stated import limits are: standard OCI — 90 days after the associated last click; ECL — 63 days after the last click.[28] A settlement occurring after that window cannot be retroactively counted as a Google Ads conversion for the originating click. Confirm the applicable limit for the specific upload method before designing the data pipeline, because Google’s documentation distinguishes among import mechanisms.[28]

For finance products where settlement takes 30–45 days, the 63-day ECL window is normally sufficient for approval events but can be tight for settlement if underwriting or documentation delays extend beyond six weeks. In those cases, optimise to approval and track settlement separately as a downstream business KPI.

14.3 What to bid towards when settlement happens weeks after the click

Use approval as the primary bidding event and assign it an expected value calculated as: settlement probability × expected lender margin. Import settlement as a secondary event for reporting. Upload CRM data at least daily; Google recommends frequent, consistent uploads for Smart Bidding stability.[27] Do not change the bid strategy while the system is still accumulating delayed approval data — allow at least two full conversion-lag cycles before evaluating performance.

14.4 Value-based bidding

Use Maximise Conversion Value or Target ROAS only after: (a) at least 30 approval events per month are flowing into the account; (b) value assignments are consistent and defensible; and (c) the conversion window covers the actual approval lag. Assign different values to product segments only where the segmentation is lawful, robust and not based on sensitive personal characteristics.

Worked example (illustrative)

Economics of a chattel mortgage campaign optimised to approval

  • Setup: A regional truck dealership advertising a 5.99% p.a. chattel mortgage offer on a $9,000 monthly budget. Settlement typically occurs 28 days after submission; lender margin per funded deal is $1,800.
  • Numbers: $9,000 / $35 mid-point CPC[11] = 257 clicks; 257 × 3.2% conversion rate[9] = 8 application submissions; 8 × 65% approval rate = 5 approvals; 5 × 80% settlement rate = 4 funded deals; 4 × $1,800 margin = $7,200 revenue; cost per funded deal = $9,000 / 4 = $2,250; ROAS = $7,200 / $9,000 = 0.80. Target ROAS set at 0.80 initially; after three months of data, raised to 1.00 once approval-to-settlement rate is confirmed.
  • Decision: Primary conversion action set to “Application approved” imported via OCI with a static value of $1,440 (= $1,800 × 80% settlement probability); settlement imported as secondary for reporting only.
  • Why: Bidding to a value-weighted approval event gives Smart Bidding a signal within the 90-day OCI window while settlement events (at day 28+) remain within that limit but approval events at day 3–5 provide faster feedback for algorithm learning.[28]

Worked example (illustrative)

63-day ECL window constraint on a long-cycle commercial loan

  • Setup: A commercial property finance broker advertising a variable-rate business loan. Average time from click to settlement is 52 days; time from click to credit approval is 18 days.
  • Numbers: Click occurs 1 November 2026. Credit approval at day 18 = 19 November — within 63-day ECL window with 45 days to spare. Settlement at day 52 = 23 December — within 63-day ECL window with 11 days to spare. If underwriting is delayed by 15 days, settlement moves to 7 January 2027 = day 67, which is 4 days outside the 63-day ECL limit and cannot be imported for that click.
  • Decision: Primary bidding event set to credit approval (day 18); settlement imported via standard OCI (90-day limit) as a value event, not a primary goal.
  • Why: Google’s ECL limit of 63 days after last click means settlement events on delayed deals fall outside the attribution window and cannot inform Smart Bidding for those clicks.[28]

15. The Landing Page Beyond Compliance

Failure mode: A page that is legally compliant but slow, cluttered or unpersuasive generates the disclosed disclosures Google requires but converts at 0.8% instead of 3.2%, tripling the effective CPL and making the campaign uneconomical before a single optimisation lever is pulled.

The compliance requirements in section 8 set the floor. This section covers the performance layer built on top of that floor.

15.1 Page speed

Finance applicants on mobile are comparison-shopping. A page load time above three seconds on a 4G connection produces material drop-off. Target a Google PageSpeed Insights mobile score above 70 and a Largest Contentful Paint below 2.5 seconds. Serve the compliance disclosure block as static HTML, not JavaScript-rendered content, so it loads with the page and passes Google’s crawl simultaneously.

15.2 Above-the-fold hierarchy

The initial viewport on mobile should contain, in order: (1) the offer headline with rate and term, including the comparison rate and its warning; (2) the primary call to action — “Get a Quote” or “Apply Now”; (3) a three-line trust block — ACL number, lender name, physical address. The compliance block and representative example sit immediately below the fold, not in the footer. This layout satisfies Google’s “immediately visible” requirement[6] without sacrificing conversion hierarchy.

15.3 Form design

A finance enquiry form should request: business name, ABN, asset type, loan amount, contact name, phone and email. Do not ask for tax returns, bank statements or identity documents on the landing page — that belongs in the application portal. A shorter initial form increases submission rate; the qualification event (section 14) then filters quality downstream. Use Google’s lead form asset only if the lender can accept and action leads within five minutes; research from a US mortgage study found contact odds are 100× lower after 30 minutes versus five minutes.[16] While that study is US-based and not directly applicable as an Australian benchmark, the directional principle — speed of follow-up materially affects lead quality — is operationally relevant.

15.4 Trust signals that do not breach policy

Permissible trust signals include: ACL or AFSL number with a link to the ASIC register; industry association membership with a logo linked to the association’s member directory; a security certificate badge from the actual SSL provider; and a plain-English statement of what happens to submitted data. Do not display third-party ratings, government logos, or ASIC branding without substantiation and a direct link to the original source.[20]

Worked example (illustrative)

Conversion rate uplift from form-length reduction on a $12,000 monthly budget

  • Setup: An equipment finance broker running a Search campaign on a $12,000 monthly budget at an average CPC of A$28 (within the A$20–A$50 Australian financial services benchmark[11]). Initial 12-field form converts at 1.8%. A six-field version is tested.
  • Numbers: $12,000 / $28 = 429 clicks per month. At 1.8%: 429 × 1.8% = 8 submissions. At 3.2% (Australian accounting and finance benchmark[9]): 429 × 3.2% = 14 submissions. Delta = 6 additional submissions per month; at 65% approval rate = 4 additional approvals; at $1,800 margin each = $7,200 additional margin per month. Form change costs $0 in media.
  • Decision: Six-field form deployed as the primary variant; 12-field form retained as a secondary path linked from a “Detailed application” anchor for users who prefer to provide more upfront.
  • Why: Reducing friction increases submission rate toward the published Australian finance conversion benchmark of 3.2%[9]; the compliance block remains fully visible above the form as required by Google policy.[6]

16. The Launch Timeline and the 30/60/90-Day Plan

Failure mode: Starting the verification and build process the week before an offer launches means the campaign goes live in week three of a four-week window, at which point more than half the offer period is gone and the Smart Bidding algorithm is still in its learning phase when the offer expires.

16.1 Working backwards from offer expiry

The table below uses the research turnaround figures: advertiser identity verification 3–5 business days[19]; financial services verification (G2RS + Google) 7–14 calendar days[14] with conservative upper end used; Google ad review 1–3 business days; Smart Bidding learning phase approximately 7–14 days for a new campaign. All dates use a hypothetical offer expiry of 31 January 2027.

Milestone Duration (conservative) Latest safe date (working back from 31 Jan 2027)
Offer expiry / last day to convert — 31 January 2027
Smart Bidding learning phase ends (14 days) 14 calendar days 17 January 2027 — campaign must be live by this date
Ad review complete (3 business days) 3 business days ≈ 5 calendar days 12 January 2027 — ads must be submitted by this date
Landing page built and reviewed internally 3 business days 7 January 2027
Campaign structure built in Google Ads 2 business days 5 January 2027
Financial services verification certificate received from Google 14 calendar days 22 December 2026 — submit to Google by this date
G2RS application approved and code issued 7 calendar days (within 14-day window) 15 December 2026 — apply to G2RS by this date
Advertiser identity verification complete 5 business days ≈ 7 calendar days 8 December 2026 — submit identity verification by this date
Legal and compliance review of ad copy and landing page 5 business days 1 December 2026
Latest safe project start date — 1 December 2026 — 61 days before offer expiry

Any delay past 1 December 2026 compresses the Smart Bidding learning phase or eliminates it entirely. A campaign launched on 12 January 2027 — 19 days before expiry — gives the algorithm no time to stabilise before the offer window closes.

16.2 The 30/60/90-day operating plan

Days 1–30 (launch and learn): Run Search only with exact and phrase match. Set Maximise Conversions with no target CPA. Primary conversion: application submitted. Monitor search terms daily; add negatives weekly. Review ad disapprovals within 24 hours. Upload first CRM approval data at day 14. CPL target: below A$250 (top of Australian B2B finance CPL benchmark range[12]).

Days 31–60 (optimise): Transition primary conversion to qualified application or approval once 30+ events are accumulated. Set a Target CPA of A$180 (mid-point of A$120–A$250 B2B finance CPL range[12]). Test one broad-match ad group in a controlled budget of $1,500/month. Begin Demand Gen remarketing to rate-page visitors. Review ECL match rate; investigate if below 40%.

Days 61–90 (scale or rationalise): If approval CPA is below A$200 and settlement rate is above 70%, increase budget by 20% and expand to Performance Max. If CPA is above A$300, pause broad match, tighten geographic targeting and review landing-page conversion rate. Begin planning next offer cycle with the 61-day lead time from section 16.1.

Worked example (illustrative)

Process calendar for a 28 February 2027 offer expiry

  • Setup: A commercial vehicle financier with an end-of-financial-quarter 5.79% p.a. offer expiring 28 February 2027. Identity verification not yet completed. G2RS application not yet lodged.
  • Numbers: Working back: offer expires 28 Feb 2027. Smart Bidding needs 14 days live = campaign must be live by 14 Feb. Ad review 3 business days = ads submitted by 9 Feb. Campaign built by 5 Feb. Google issues verification certificate by 26 Jan (14-day processing). G2RS code submitted to Google by 26 Jan means G2RS application lodged by 19 Jan (7-day G2RS turnaround). Identity verification submitted by 12 Jan (5 business days). Legal review starts 5 Jan. Latest safe project start: 5 January 2027 — 54 days before offer expiry.
  • Decision: Project kick-off scheduled for 5 January 2027; G2RS application assembled and ready to lodge 12 January 2027; all dates entered into the project tracker with owner assigned to each milestone.
  • Why: The 7–14 calendar day verification turnaround[14] plus 14-day Smart Bidding learning phase means fewer than 54 days of lead time produces a campaign that is still learning when the offer closes.

17. When It Goes Wrong: Disapprovals, Suspensions and Appeals

Failure mode: Treating an account-level suspension as though it were an ad disapproval — by editing the ad copy and requesting review — wastes days, does not address the suspension, and can be interpreted as continued circumvention, hardening Google’s position before the correct appeal is lodged.

Google’s finance enforcement falls into three distinct categories. The correct resolution path depends entirely on which category has been triggered. Misidentifying the category is the single most common reason appeals fail.

17.1 Ad-level disapproval

An ad disapproval means a specific ad, asset or keyword has been found non-compliant. The rest of the account continues to serve. The disapproval reason appears in the Status column or Policy manager. Common finance triggers include: insufficient disclosures, misrepresentation, unacceptable business practices, and missing comparison-rate information.[29]

Resolution path: (1) Read the policy label — do not assume. (2) Correct the specific ad, asset or landing page to address the stated reason. (3) In Google Ads, open Policy manager, select the disapproved ad, choose Appeal, then select either Dispute decision (if Google made an error) or Made changes to comply with policy (if you have fixed the issue).[30] (4) Each ad has a limit of three appeals; after three unsuccessful appeals, contact Google Support directly.[30] Stated timeline: Google does not publish a guaranteed ad-review turnaround; the research identifies 1–3 business days as a typical range for initial review.

17.2 Destination or landing-page issue

A destination issue means the ad copy itself may be acceptable but the final URL is inaccessible, redirects unexpectedly, lacks required disclosures, contains prohibited content, or does not match the ad’s claims.[29] The status label typically reads “Destination not working” or references a specific destination policy.

Resolution path: (1) Test the final URL on mobile and desktop — check SSL, redirects, load speed and crawlability. (2) Add the required disclosures (physical address, fees, ACL/AFSL number, representative example) as visible on-page text, not in a PDF or accordion.[6] (3) Ensure the landing-page offer matches the ad exactly — rate, term, eligibility and expiry. (4) Submit the ad for review using the same appeal path as an ad disapproval.[30] Stated timeline: Same 1–3 business day estimate; complex destination reviews may take longer if Google’s crawler cannot access the page.

17.3 Account-level suspension

An account suspension prevents all ads in the account from serving. It is triggered by: financial-services verification non-compliance, payment fraud, identity misrepresentation, circumventing systems, linked-account abuse, or a pattern of repeated policy violations after strikes.[29] Google’s policy states that financial-services, debt-services and complex-speculative-products violations receive at least a seven-day warning before suspension.[21] Serious violations — fraud, phishing, malware, deliberate circumvention — can trigger immediate suspension without a warning period.

Resolution path: (1) Do not open a replacement account — this constitutes circumventing systems and can result in permanent suspension of the new account as well.[29] (2) Identify the stated reason in the suspension notification. (3) Correct the underlying business or compliance issue: complete identity verification, obtain financial-services verification, remove prohibited assets, resolve payment disputes. (4) Submit an account-suspension appeal through the link in the Google Ads notification or at the Google Ads policy support page.[31] Attach authoritative evidence directly addressing the stated reason. (5) If the suspension relates to financial-services verification, obtain the G2RS code and submit it to Google as part of the appeal.[5] Stated timeline: Google does not publish a guaranteed suspension-appeal turnaround. Allow 5–10 business days as a planning assumption; complex cases involving identity re-verification or linked accounts can take longer.

17.4 Strike system for financial-services violations

Stage What happens Action required
Warning (strike 0) Seven-day notice before first strike; ads may continue serving during warning period[21] Fix the violation within seven days
Strike 1 Three-day account pause[32] Acknowledge strike; correct violation; account auto-reinstates after pause
Strike 2 Seven-day account pause[32] Acknowledge strike; correct all remaining violations
Strike 3 Permanent account suspension[32] Appeal with full corrective evidence; no guarantee of reinstatement

Worked example (illustrative)

Process calendar for a destination-issue disapproval during a 45-day offer window

  • Setup: A commercial equipment financier launches a 6.29% p.a. fixed-rate offer on 1 December 2026 with an offer expiry of 15 January 2027 (45-day window). On day 3 (4 December), ads are disapproved for “Destination: insufficient disclosures” — the comparison rate warning is inside a collapsed accordion.
  • Numbers: Day 3: disapproval received. Day 4: accordion replaced with static visible text; comparison rate warning added as plain HTML. Day 4: appeal submitted (“Made changes to comply with policy”). Day 6 (3 business days review): ads reinstated. Days 3–6 = 3 days of zero serving = 3/45 = 6.7% of offer window lost. At $600/day budget, 3 days = $1,800 of unspent budget; if the window cannot be extended, that spend is forfeited.
  • Decision: Landing page pre-tested against Google’s crawl tool before launch; comparison-rate warning deployed as static HTML in the initial build to avoid recurrence.
  • Why: Google requires disclosures to be immediately visible without clicking or hovering[6]; an accordion fails that test and triggers a destination disapproval that consumes offer-window days even when resolved quickly.

18. What Changed Recently (last 30 days)

This section covers only changes identified in the research for the period 21 September to 21 October 2026. It is intentionally brief because no new Australia-specific Google Ads verification deadline or disclosure rule was announced in this period.[4]

18.1 No new Australian Google Ads verification requirement

Australia’s financial services verification enforcement start date remains 30 August 2022. Google’s location-specific verification page continues to identify ASIC, AFSA and the Australian Business Register (ABN/ACN Lookup) as the relevant Australian sources.[3] No new Australian enforcement date, product category or verification category was announced in this period.

18.2 New EEA verification requirements — not Australian

On 20 October 2026, Google announced new financial services verification requirements for advertisers in 24 additional European Economic Area markets. Affected EEA advertisers must obtain verification through G2 (Google’s external compliance partner for those markets) and then apply to Google using the issued code.[33] Advertisers notified who do not complete the process by their specified enforcement date will be prevented from showing financial-services ads in those locations. This is an EEA-specific announcement; it does not create a new Australian obligation.

18.3 US and Canada expansion announced for early 2027 — not Australian

Google announced on 20 October 2026 that financial services verification will expand to the United States and Canada in early 2027.[34] The announcement states the programme already operates in 42 countries and does not identify Australia as receiving an amended requirement. Australian advertisers with US or Canadian campaigns should monitor the country-specific onboarding details Google has indicated will be provided before that launch.

18.4 ASIC RG 234 updated 3 October 2026

ASIC’s Regulatory Guide 234, Advertising financial products and services (including credit) was updated on 3 October 2026.[8] The available research does not identify a specific change log for that update. Australian finance advertisers should review the current version of RG 234 — particularly sections on rate claims, fees, qualifications and balanced presentation — rather than rely on a prior version. The guide’s core obligations (accurate claims, balanced presentation of costs and risks, prominent qualifications) remain unchanged in their broad intent.

18.5 Chile and Denmark complex speculative products policy update

Google’s October 2026 policy-update page notes a change to the complex speculative financial products policy for Chile and Denmark.[35] This does not affect Australian credit, equipment finance or ordinary financial-services advertising.

This article provides general information for practitioners and does not constitute legal advice. Confirm all verification, licensing, disclosure and compliance requirements with the advertiser’s legal advisers and with the relevant verification provider before launching any Australian financial-services campaign.


References

  1. [1] https://support.google.com/adspolicy/answer/15332527?sjid=12477732124976184590-NA&co=GENIE… support.google.com
  2. [2] https://support.google.com/adspolicy/answer/15332527?sjid=12477732124976184590-NA&co=GENIE… support.google.com
  3. [3] https://support.google.com/adspolicy/answer/12390454?hl=en support.google.com
  4. [4] https://support.google.com/adspolicy/answer/15332527?sjid=12477732124976184590-NA&co=GENIE… support.google.com
  5. [5] https://support.google.com/adspolicy/answer/15332527?sjid=12477732124976184590-NA&co=GENIE… support.google.com
  6. [6] https://support.google.com/adspolicy/answer/15332527?sjid=12477732124976184590-NA&co=GENIE… support.google.com
  7. [7] https://download.asic.gov.au/media/cvcjdpy5/rg234-published-09-june-2026.pdf download.asic.gov.au
  8. [8] https://www.asic.gov.au/regulatory-resources/find-a-document/regulatory-guides/rg-234-adve… www.asic.gov.au
  9. [9] https://createandgrow.au/resources/google-ads-budget-planner createandgrow.au
  10. [10] https://www.spacewolf.au/blog/google-ads-cost-australia www.spacewolf.au
  11. [11] https://3pdigital.com.au/blog/how-to-audit-your-google-ads-account-step-by-step-checklist-… 3pdigital.com.au
  12. [12] https://3pdigital.com.au/blog/linkedin-ads-vs-google-ads-for-b2b-australia-cost-per-lead-c… 3pdigital.com.au
  13. [13] https://www.involvedigital.com/guides/financial-services-customer-acquisition www.involvedigital.com
  14. [14] https://brandfoxdigital.com/articles/digital-marketing/how-to-use-google-ads-to-grow-your-… brandfoxdigital.com
  15. [15] https://www.graphed.com/blog/google-ads-for-fintech www.graphed.com
  16. [16] https://aloware.com/blog/generate-mortgage-leads aloware.com
  17. [17] https://support.google.com/google-ads/answer/10029210?hl=en support.google.com
  18. [18] https://support.google.com/adspolicy/answer/2464998?hl=en support.google.com
  19. [19] https://developers.google.com/google-ads/api/docs/account-management/advertiser-identity-v… developers.google.com
  20. [20] https://support.google.com/adspolicy/answer/13404352?hl=en-AU support.google.com
  21. [21] https://support.google.com/adspolicy/answer/15187149?hl=en support.google.com
  22. [22] https://www.legislation.gov.au/C2009A00134/2021-01-01/2021-01-01/text/original/pdf/2 www.legislation.gov.au
  23. [23] https://www.legislation.gov.au/F2010L00631/2025-03-08/2025-03-08/text/original/pdf www.legislation.gov.au
  24. [24] https://www.accc.gov.au/consumers/advertising-and-promotions www.accc.gov.au
  25. [25] https://www.legislation.gov.au/C2009A00134/2024-12-11/2024-12-11/text/original/pdf/2 www.legislation.gov.au
  26. [26] https://www.legislation.gov.au/current/c2012c00083 www.legislation.gov.au
  27. [27] https://support.google.com/google-ads/answer/2998031?hl=en support.google.com
  28. [28] https://support.google.com/google-ads/answer/11347292 support.google.com
  29. [29] https://support.google.com/adspolicy/answer/6008942?hl=en support.google.com
  30. [30] https://support.google.com/google-ads/answer/7501932?hl=en support.google.com
  31. [31] https://support.google.com/google-ads/contact/site_policy support.google.com
  32. [32] https://support.google.com/adspolicy/answer/15188217?hl=en support.google.com
  33. [33] https://support.google.com/adspolicy/answer/17127726?hl=en-AU support.google.com
  34. [34] https://blog.google/products/ads-commerce/financial-services-verification-united-states-ca… blog.google
  35. [35] https://support.google.com/adspolicy/answer/18546412?hl=en support.google.com
Share the Post:

Related Posts